China 12V DC Booster Pump for Car RV Supplier, Suppliers

A portable submersible pump (portable submersible pump) lifts water from an open container into a storage tank, while a 12 V DC booster pump raises pressure inside a closed line. In cars and RVs, the 12 V DC booster pump for car and RV sits downstream of the fresh-water tank or city-water inlet and maintains flow at faucets and showers.

Product Description

Installation Rules and Application Boundaries

⚠The EWP080F booster pump is designed for closed-pipe pressure boosting, not for open-tank pumping where a portable submersible pump (portable submersible pump) is required for tank replenishment.

Install the booster pump within 0.5 m downstream of the tank outlet or city-water inlet to avoid cavitation at the impeller inlet, which is the most common failure mode for RV booster pumps.

Submersible Cooler Pump

How a 12 V DC Booster Pump Works in Car and RV Water Systems

⚡12 V DC Power Architecture and EWP080F Technical Parameters

Vehicle and motorhome house circuits run on 12 V DC. The ANSI/RVIA standard for low-voltage DC systems in recreational vehicles covers 12 V and 24 V pump circuits. At equal wattage, 12 V draws roughly twice the current of 24 V: the EWP080F model rated 60 W draws about 5 A (±10% tolerance) at 12 V, so 16 AWG wire and a 7.5 A fuse are sufficient for this current load.

Specification

MODEL: EWP080F
dc1 AMBIENT TEMP -40~125℃
HUMIDITY Below 90% RH
MEDIUM PURE WATER/ANTIFREEZE
MEDIUM TEMP -40~100℃
WATERPROOF IP67
CONSTANT/CONTINUOUS PRESSURE NA
SPECIFICATION FEATURE
RATED VOLTAGE 12V DC COLOR Black
RATED CURRENT 5(1±10%)A WEIGHT 650 g
RATED POWER 60(1±10%)W NOISE ≤ 45dB@1m
MAX FLOW ≥45L/min LIFETIME ≥20 00H
MAX HEAD 9±1m INSULATION H (180℃)

Frequently Asked Questions

What is the difference between a portable submersible pump and a 12 V DC booster pump?

A portable submersible pump is placed directly in the water source to lift water to a higher tank, while a 12 V DC booster pump is installed in closed pipes to increase water pressure for faucets and showers.

Can the EWP080F booster pump work with antifreeze in cold climates?

Yes, the pump is compatible with non-corrosive antifreeze, with a medium operating temperature range from -40 ℃ to 100 ℃, suitable for winter RV use.

What wire gauge and fuse should be used for the EWP080F pump?

The pump rated at 60 W draws 5 A at 12 V DC, so 16 AWG wire and a 7.5 A fuse are recommended for safe operation.

What is the maximum noise level of the EWP080F pump?

The pump operates at a noise level of no more than 45 dB when measured at a distance of 1 meter, which is quieter than normal conversation.

Can the EWP080F pump run continuously for long periods?

The pump is designed for intermittent pressure boosting use, not for continuous constant-pressure operation, which matches the design specification of NA for constant/continuous pressure.

Related Products